SpikeWheel™
With new demands such as no till, hard soils, and sod the
SpikeWheel™ has been designed to be accurate, efficient, effective and
adaptable. Learn more here.
SpikeWheel™ Parts List
Click
on an image to see a larger view.
|
SpikeWheel™
The complete SpikeWheel™. Constructed of 304 Stainless
Steel, Hardened Alloy Injection points, and nylon hub bushings.
Provides superior down pressure in hard soils.
Part #SW15-21 |
|
Standard
Spoke Wheel
The stainless steel wheel is 21 inches in diameter with 12 injector
points. It has a stainless steel hub with a 1 inch stainless
steel axle.
Part #210-98 |
|
Distribution
Hub
The complete distribution hub assembly. Hub shell is constructed
of 304 stainless with a nylon metering sleeve and bushings.
Part #1500 |
|
Spring
Arms
Allows SpikeWheel™ to be mounted to a variety of applications.
5/8" mounting block holes are set on 2" centers and
permit attachment to toolbars with "ditcher bars",
existing cultivators, and planters. Available in 3/4" or
7/8" spring diameter.
Part:
3/4" #BO-750-15
7/8" #BO-875-15 |
|
Replacement
Dish
Replacement wheel dish constructed of 304 stainless. Includes
12 injection points that are pre-welded for easy assembly.
Existing hub bolts on with ease, connect distribution tubes
and wheel is complete.
Part #SS2100 |
| SpikeWheel with the turf points NEW!
The new SpikeWheel was designed specifically for turf, athletic fields and golf courses and includes a new Quick Change Point System with bolt-on injector spikes, a smaller diameter spike to provide minimal disturbance of fine grasses, and hardened-alloy chrome tips allow for longer wear life and improved penetration of hard surfaces. Learn more about this equipment and our LiquiJect product line.
Part #SW15-21QT |
|
Master
Hub Rebuild Kit
Complete kit for rebuilding the distribution hub. Includes
all internal components which are:
(1)
Axle Shaft
(4)
O-Rings
(3)
Bushings
Part
#MHRK-08 |
|
Basic
Hub Rebuild Kit
Basic kit
for rebuilding the distribution hub. Includes the following:
(1)
Axle Shaft
(4)
O-Rings
(1)
Axle Bushing
Part
#BHRK-06 |
|
O-Ring
Kit
Kit containing all O-Rings used within the distribution
hub.
(1) Blind Bushing O-Ring
(2) Metering Sleeve O-Rings
(1) Internal Axle Bushing O-Ring
Part
#ORK-04 |
|
Snap
Ring Kit
Complete Snap Ring Kit for the distribution hub.
Contains one external stainless steel snap ring and one stainless
steel internal axle snap ring.
Part #SRK-02 |
|
Nuts & Washers for all Bolt On Injector Spikes
Each set contains 12 of each stainless steel nut and stainless steel washer used to attach all bolt on injector spikes to the SpikeWheel Dish.
Part:
#SSN-58
#SSW-58 |
|
Set of 12 Bolt On Ag Injector Spikes
Each set contains 12 replacement bolt on SpikeWheel injection spikes which come in either 3 or 4 inch length. Each has a hardened chrome tip for longer wear life.
Part:
#BA 300-12 (3 inch)
#BA 400-12 (4 inch)
|
|
Set of 12 Bolt On Turf Injector Spikes
Each set contains 12 replacement bolt on SpikeWheel injection spikes for turf which come in 2 inch length. Each has a hardened chrome tip for longer wear life.
Part #BT 200-12 (2 inch)
|
|
Set of 12 Weld On Ag Injector Spikes
Each set contains 12 replacement weld on SpikeWheel injection spikes which come in either 3 or 4 inch length. Each has a hardened chrome tip for longer wear life.
Part:
#SW003-12 (3 inch)
#SW004-12 (4 inch)
|
|
Connector
Tubes
Kit containing set of 12 connector tubes. Attaches
to stainless fittings on distribution hub and provides product
flow to each injection point.
Part #TCON-12 |
|
Hub
Fasteners
Individual fasteners for mounting distribution hub
to the wheel dish. 3/8" nuts and bolts constructed of stainless
steel.
Part:
Bolt #SSB-01
Nut #SSN-01 |
|
Axle
Shaft Supply 90's
Individual polyurethane 90 degree supply pieces. 1/4" inside diameter tubing is slipped over barbed tip to supply
product to axle shaft.
Part #P90-01 |
